|
Modeller Handpump
-
Bravo MIL
This item is manufactured with high shock resistance compounds.
Equipped with stainless steel handle and stop spring.
-
Bravo JUMBO
Very resistent hand pump, destined to a professional use.
• Single-action pump; diameter 12,5 cm (5”);
• Can inflate and deflate;
• Capacity 400 l/min at 60 strokers/min;
• Really strong body made of PVC;
• Adjustable support for the hose (it makes the inflation and deflation easier);
• PVC hose (lenght 2 mm/78”);
• Gasket made of silicon rubber. Spare gasket for the piston inside the pump.
• Height 70 cm (28”);
• Provided with adaptor for the most common type of valves.
|
Modeller Fotpump
-
Bravo 10
With BRAVO 10 double chamber pump, inflation to the
raccomended pressure of all fabric or rubberrised boats, can
easily be achieved with very limited effort. Should you not
use a pressure gauge to control the boat pressure,
BRAVO 10 footpump is provided with a visual pressure indicator
to warn against over-inflation.
Manufactured from a strong nylon reinforced fiber glass;
Unalterable by the sun or sea environment;
Big but lightweight due to the use of modern syntetic
materials (only 1,9 kg.);
4 antislip feet for greater stability;
Standard crush resistant hose;
Universal hose/valve adaptors supplied as stansard;
All stainless stell metal parts
-
Bravo 9 HP
HIGH EFFICIENCY - HIGH PRESSURE up to 1,0 bar (14,7 psi)
Double chamber with a device allowing the use of the optimal
inflating capacity for both the tubes and the bottom at high
pressure.
To inflate the tubulars, start inflating with the
insered cap, by exploiting completely the capacity.
To inflate the bottom, follow the same
procedure as for the tubular, therefore remove the cap and the
pump uses automatically the smaller chamber only, thus
allowing to reach without effort the pressure of 1,0 bar (14,7
psi).
It is recommended that a SP 125/1 pressure gauge be
used to monitor the pressure while inflating.
Dimensions: 32x23xh 7 cm
|
